User instructions
“RSD - 7255”
10
RF Tuning Function
You can watch Satellite channels and Terrestrial Broadcasting channels
using the RF Modulator.
1
Connecting to a TV which has direct RF channel “21” to “69” (“14” to
“83”-USA Channel) selection.
- Connect your TV RF input to the TV/VTR terminal of the RSD-7255.
Connect the terrestrial antenna cable to the ANT terminal of the
RSD-7255's RF Modulator.
- Tune the RF channel of your TV to channel “40”. (The factory
default RF channel is “40”).
2
Connecting to a TV which does not support direct RF selection.
- Connect your TV RF input to the TV/VTR terminal of the RSD-7255.
Connect the terrestrial antenna cable to the ANT terminal of the
RSD-7255's RF Modulator.
- Try to find the channel by using the Channel Search tuning function
of the TV.
3
If it is not possible to tune to the RF channel in the above-mentioned
cases, please try following steps for tuning RF channel:
- Connect your TV RF input to the TV/VTR terminal of the RSD-7255.
Connect the terrestrial antenna cable to the ANT terminal of the
RSD-7255's RF Modulator.
- Tune the TV to any RF channel “21” to “69” (“14” to “83”-USA
Channel) and press UHF key on the remote control. The front panel
display will show "No." followed by the RF channel number.
- Press
or
key of the RCU repeatedly until the TV screen
shows the TPSG (Test Pattern Signal Generator).
- Press EXIT or OK (LIST) key on the remote control to exit the RF
tuning mode.
- Go to the "Option" menu of the RSD-7255 and select the
appropriate "PAL Type" in the "UHF Standard" menu.
4
Press EXIT key to scape from the menu.
PAL G
NO. 40
Test Pattern Signal
UHF TUNING MODE ...
If there is an interruption of AC power caused by pulling out the main plug of the RSD-7255 or brown-outs (power
interruptions), once AC power is reapplied the previous TV channel and last selected Audio mode, appears without having to
press the
key.
Last Channel Auto-Saving and Recall
