CoaxManager
™
User Guide
16
•
Source and Destination MAC
: MAC Address of devices that MAC devices that make up the link.
•
TX Rate Coded/PHY y RX Rate Coded/PHY
(Mbps): Estimated Channel rate, for both
transmission and reception.
•
Avg.SNR
: Average SNR estimation of received signal
•
Avg.Attenuation
: Average attenuation of the signal in the transmission network.
Generating traffic to verify network links
Some of the information associated with the devices are shown only in the event that there is effective
transmissions between two devices. If a device is not connected to any PC, STB or other devices,
Generate Traffic button allows virtual generation of traffic between connected device and remote devices
that are part of the network.
This feature is only available when connected locally to a device through an
Ethernet cable, but is not available when CoaxManager connect to a remote
device.
Once the traffic generated between all links, the application displays a message indicating packet
generation is over. With this option we can get an estimate of channel between devices without any
active hosts on devices, this is useful to check the links at the time of installation of apartment buildings,
hotels, etc. ..
The duration of this test depends on the number of devices that form
the data network.
Generating Reports for Checking Network State
application can generate reports containing all the information concerning the status of the network.
These reports allow you to export information generated by the application in PDF for later review.
Generate Report Button
automatically generate the PDF report
:
E
N
G
L
IS
H
