Televes 718001, User Manual

Page: 10 / 16

SAT over IP
10
5. LNB Settings:
Unless a Unicable-LNB is used, no change should be needed. Local oscillator
frequencies are preprogrammed: 10600MHz for high band and 9750MHz for
low band.
If a Unicable-LNB is used, select option “Unicable“ and select the desired
frequency. Finally click on “Apply “.
Note
: In this application, the Unicable LNB should be connected to the VL
input (a).
3. Network Setting:
Network Interface :
The default interface of the server is Ethernet. The user shall
not to change anything.
IP Settings : Here you can select whether the IP is automatic or static (fixed).
By default it is automatic. For “static“ configuration, the user must
have knowledge about IP , Netmask, Gateway and DNS . The SAT-IP
server does not have any DHCP function, so it is the router that has
to handle it.
Time Correction : Select the time zone and the SAT -IP server automatically
updates the hour.
4. Software Upgrade:
The update is via the web interface or internet. For an online update, just
select “Enable“. The SAT -IP server will automatically search for the latest
software version.