EN
23
14. Setup
Change main configuration settings:
-
Ter. Network
: Aerial, Cable.
-
Cable Standard
: J.83-B / A.
-
Ter. Plan
: Selected Terrestrial plan.
-
Language
: English, Español.
-
Units
: dBµV, dBmV, dBm
-
Quality profiles
: Trunk, Tap, End Line,
Ground.
Different thresholds are available for different
testing locations.
-
Analog Standard
: Selects the standard
for the analog channels and changes
automatically the audio carrier to a value
according to the selected standard.
- Audio Carrier:
4.5 MHz, 5.5 MHz, 6.0 MHz,
6.5 MHz.
-
Volume
- Network:
Setup:
Manual, Auto.
When Setup Manual is selected, the user
must set the IP, gateway and DNS.
Gateway
IP
DNS
-
Wi-Fi :
Allows to connect the H30+/D+/
D+Adv to a Wi-Fi network.
Wi-Fi:
On, Off
Scan
: When Wi-Fi is turned on, shows a
list of all the found Wi-Fi networks.
As you can see in the image above, the list
shows the name of the Wi-Fi networks and
indicates if the network is open or restricted,
as well as the protection access type.
To access to a restricted network, you must
enter the password using and
To verify the password, find a red square
behind the last character of the password
and press
If you connect a mobile device (such as a
mobile phone, tablet, etc.) and your H30+/
D+/D+Adv to the same Wi-Fi network,
you can use your mobile device to control
your
H30+/D+/D+Adv
. You just have
to download the
H30+/D+/D+Adv
app
(available for IOS and Android)
MAC
: The MAC can be set automatically
or user-selected
Setup
: Auto, Manual
MAC
: When Setup Manual is selected,
the user must enter the MAC using
navigation buttons and
SSID:
Shows the SSID of the H30+/D+/
D+Adv
BSSID:
Shows the SSID of the H30+/D+/
D+Adv
IP:
Shows the SSID of the H30+/D+/
D+Adv
-
Units System
: Metric, Imperial
-
Time and Date
:
Set current time (hour and minutes) and
date (day of the month, month and year).
- Energy:
Auto suspension
Auto shutdown
-
Update firmware
: ON, OFF
When ON, every time the
H30+/D+/
D+Adv
is connected to the internet, it will
allow the user to update the firmware if a
new version is available.
-
Reset configuration
: Resets the meter to
factory settings.
- Licenses:
Shows the options included in you
H30+/D+/D+Adv
- About SW:
Shows the firmware version
- About HW:
Shows the product reference
number, serial number and IP address.
15. IPTV (H30D+Adv.)
This menu provides the necessary measurements
and parameters to guarantee a correct reception of
IPTV services.
12.1. IPTV functions
To achieve this, this menu has three functions: