H30+ H30D+ - CATV & DOCSIS 3.1 Meter /Analyzer
22
14. Setup
Change main configuration settings:
-
Ter. Network
: Aerial, Cable.
-
Cable Standard
: J.83-B / A.
-
Ter. Plan
: Selected Terrestrial plan.
-
Language
: English, Español.
-
Units
: dBµV, dBmV, dBm
-
Quality profiles
: Trunk, Tap, End Line,
Ground.
Different thresholds are available for different
testing locations.
-
Analog Standard
: Selects the standard
for the analog channels and changes
automatically the audio carrier to a value
according to the selected standard.
- Audio Carrier:
4.5 MHz, 5.5 MHz, 6.0 MHz,
6.5 MHz.
-
Volume
- Network:
Setup:
Manual, Auto.
When Setup Manual is selected, the user
must set the IP, gateway and DNS.
Gateway
IP
DNS
-
Wi-Fi :
Allows to connect the H30+/D+/
D+Adv to a Wi-Fi network.
Wi-Fi:
On, Off
Scan
: When Wi-Fi is turned on, shows a
list of all the found Wi-Fi networks.
11.2. Map view
11.3. Setup
Press
to change the Wi-Fi Scan options.
- Band:
Select band to scan (2.4GHz, 5GHz or
both)
-
Mode
: Selects between Map or List View
- Sort:
Only in List View mode. Allows to select
how to sort the Wi-Fi list: name, level, or channels
- Save datalog:
Saves the current scan
measurements. You can see the datalogs
using the remote control application.
Graph
showing the wifi networks. Each
triangle represents a network. The height
of the triangle represents the power of the
access point signal.