Televes 563501, User Instructions

Page: 17 / 28

EN
17
b. Identifi ers menu
Some DVB-C receivers may have problems
receiving transmodulated channels that share
the same identifi er (
transport_stream_id ). To avoid
these cases, the user can change the following
output multiplex identifi ers:
transport_stream_id (ts_id)
network_id (n_id)
original_network_id (on_id).
You can choose between Auto mode (identifi ers
are not changed) or Manual mode.
When switching from Auto mode to Manual mode,
the display lists the identifi ers received at the input
and the user can change them.
NIT IDs
Auto
IDs Manual
ts_id:0x04fc
n_id: 0x055f
on_id:0x055f
This menu is not displayed in Transparent mode.
Output tables are the same as the input ones.
c. Temperature measurement menu
The following menu indicates the unit’s current
temperature as well as the maximum recorded. It
is possible to reset the maximum by pressing the
key.
MONITOR
Now: 04
Max: 05
reset
The recommended operational margins are as
follows:
• Optimum Operation : 0-6
• High Temperature: 7-8
• Excessive Temperature: 9-10
If the maximum recorded is outside the optimum
margin, the installation should be revised in an
attempt to reduce the temperature.
If the DVBS2-QAM CI modules have been installed
in a housing ref. 5069 and the temperature of one
of the modules is outside of the optimal operating
range, the ventilation unit will have to be installed
ref. 5334. To check whether this change is eff ective
the maximum can be reset and its value checked
after a given time.
d. Versions menu
This menu displays the fi rmware versions for
the unit as well as the one of the QAM modulaor
(FPGA).
VERSION
FW:1.00.4
Mod:1.00.9
Transparent
It also lets you select between two modes of
operation:
- Processing : delete / decode services; generate
output tables and LCNs. The user selects the baud
rate of the QAM output.
- Transparent : The input data pass to the output,
simply by changing the modulation. You can not
neither delete/decode services nor adding LCNs.
The QAM output rate is calculated from both
satellite input rate and QAM modulation order
selected.