Televes 563501, User Instructions

Page: 10 / 28

DVBS2 - QAM CI
10
(UHF or VHF and with a maximum bandwidth of 8
MHz) using an
agile up-converter .
Additionally, it incorporates a Common Interface
slot for inserting a conditional access module
(CAM) that permits the unscrambling of services.
Programming of the transmodulator operating
The DVBS2 to QAM transmodulator with CI receives
a satellite transponder, in any of DVBS (QPSK) or
DVBS2 (QPSK or 8PSK) modulation formats, and
demodulates it to obtain a
transport stream packet.
Then, the transport stream packet is modulated in
QAM format and converted to the output channel
parameters (input frequency, output channel,
modulation format and adaptation of services
mainly) is performed by means of the universal
programmer (ref. 7234).
4. Elements’ descriptions
4.1. DVBS2 - QAM CI
1
3
2
4
CAM
UQQA-S2-CI-S
CTRL
PRGM
DVBS2-QAM CI
PWR
6
7
9
5
8
1. SAT IF input
2. SAT IF output
3. RF input
4. RF output
5. Powering input
6. Status LED
7. Control BUS connector
8. CAM slot
9. PC/Programmer socket
Insert the smartcard completely
into the CAM slot before powering
modules. Card contacts looking
left and forwards when it is being
inserted.
02340036001 003
CTRL
CAM PRGM
B