TeleType GPS WoldNav, User Manual

Page: 10 / 64

18
Getting Started
Restriction Information
9. When entering addresses, the GPS will first
prompt you to enter the State (you can spell the
state or the abbreviation), the next screen is
used for entering the City, the third screen is for
entering the house number (leave blank if you do
not know the street), press Next and enter the
street name (leave blank if unknown). Note that if
the street name contains a number such as 61st
Street, you can toggle the ABC button to become
123 so that you can enter the number. For
details see Getting Started, Finding or Routing to
an Address section earlier in this guide.
10. Enter your destination by Address, Intersection
or Service (a chain Truck Stop such as Loves,
Flying J’s, Pilot or Petrol, as well as independent
truck stops). Note that intersections are only for
WorldNav Navigation Software
19
use with local roads; they are not intended for
use in finding Exits on highways.
11. Once the route has been created, the GPS will
display the route from your current location to
the selected location.
12. When the GPS is locked into position you will
hear “GPS position fixed, ready to navigate.”
You will also see your position on the map
indicated by the big red arrow. The
<Where To>
and <Menu> buttons will disappear.
13. To hear a repeat of the upcoming navigation
instruction, tap the upper left hand portion of the
screen.
14. You may feel that routing and re-rerouting may
take longer than expected, keep in mind this
system is analyzing over 350,000 miles of truck
restrictions before creating the best route.
15. Your GPS has already been updated before it
was shipped to you so please do not try to
connect the GPS to a computer for updating. If
you have purchased an update policy you will
receive the update on a memory card which will
self install. Consult the appropriate WorldNav
GPS Hardware Guide for details.
16. Tap the round Info <I> button appearing on the
top left of the menu screen to learn more about