Teletronics International EZStation2 User Manual Download Page 39

Page: 39 / 58

Algorithm
Key Life Time

Fill in the key life time value by seconds.

Encapsulation

Tunnel mode.

Perfect Forward
Secrecy (PFS)

Click to select

NONE

Click the

button to save current tunnel

settings.

Cancel

Click the

Cancel

button to close current window

without any changes.

Management - Statistics

This page shows the packet counters for transmission and reception regarding to wireless,
Ethernet LAN and Ethernet WAN networks.

Item

Description

Wireless LAN

Sent Packets

It shows the statistic count of sent packets on the
wireless LAN interface.

Wireless LAN

Received Packets

It shows the statistic count of received packets on
the wireless LAN interface.

Ethernet LAN

Sent Packets

It shows the statistic count of sent packets on the
Ethernet LAN interface.

Ethernet LAN

Received Packets

It shows the statistic count of received packets on
the Ethernet LAN interface.

Ethernet WAN

Sent Packets

It shows the statistic count of sent packets on the
Ethernet WAN interface.

Ethernet WAN

Received Packets

It shows the statistic count of received packets on
the Ethernet WAN interface.

Refresh

Click the refresh the statistic counters on the
screen.

Summary of Contents for EZStation2



























































Search results

Summary of Contents for EZStation2

Reviews:

Related manuals for EZStation2

Brands by name

Popular brands

Teletronics International EZStation2, User Manual

Search results

Summary of Contents for EZStation2

Reviews:

Related manuals for EZStation2

Brands by name

Popular brands