Teletec international Minicom 6000, User Manual

Page: 26 / 87

Turning Off Turbo Code + +
You can switch to Baudot code at any time by pressing + + .
The Minicom 6000 will return to using the automatic code setting when
you turn it off.
Using Turbo Code Interrupt +
You can interrupt the other person when he or she is typing by
following these steps:
1. Verify that you can see the Turbo Code dot in the lower left
corner of your display.
2. Press the Interrupt key ( + ) while the other person is
typing. You will see
INTERRUPT REQUESTED
on the display.
3. The other person will see
INTERRUPT
on the display. He or she
can choose to stop typing and let you go ahead or ignore your
interruption and continue.
If you see
INTERRUPT
on your display while the Ring Indicator
flashes, it means that the other person wants to interrupt you and start
typing. You can choose to stop and let the other person go ahead or
continue typing yourself. You may also see
INTERRUPT
on your
display even when you are not connected in Turbo Code if the other
person taps the spacebar a few times.
Turning Off Turbo Code Interrupt + /
OPTIONS
You can turn off interrupt so that the other person cannot send an
interrupt to you. You can still send an interrupt to the other person.
Follow these steps to turn off interrupt:
1. Press the Options key ( + /
OPTIONS
).
PRINT (UP/LOW) CASE
is displayed.
2. Press until you see
INTERRUPT (ON)
on the display.
3. Press the to change the setting to
(OFF)
.
4. Press to save the new setting and exit the Options menu.
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
I Ctrl
I Ctrl
B
Shift
Ctrl
B Shift Ctrl
ADVANCED CALLING • 23