Assembly
Prepare Two MPS
26
PRISM MPS Rack Accessory Installation Instructions
4.
Use a Phillips-head screwdriver and 2 flat-head screws (M4 X 8) to connect the
middle brackets, one screw on each side. In the example only the brackets are
shown and shown apart for clarity.
-
Attach Rack-Ear Brackets and Handles, and Install in Rack
1.
Use a Phillips-head screwdriver and 4 flat-head screws (M4 X 8) to connect the 2
rack-ear brackets to the MPS, one bracket on each end.
2.
Use a Phillips-head screwdriver and 4 flat-head screws (M4 X 8) to connect the 2
rack handles to the rack-ear brackets.
WARNING: To prevent injury or damage to the instrument, do not carry the
PRISM monitor by the handles on the front of the instrument. These handles are
for pulling the instrument out of a rack installation and are not intended to be
used for carrying the instrument.
