Assembly
Prepare One MPS
23
PRISM MPS Rack Accessory Installation Instructions
WARNING: To prevent injury or damage to the instrument, do not carry the
PRISM monitor by the handles on the front of the instrument. These handles are
for pulling the instrument out of a rack installation and are not intended to carry
the instrument.
2.
Insert the MPS assembly into the rack.
CAUTION: Ambient air temperature near the equipment is not necessarily inlet
air temperature. Damage to the instrument can occur if this equipment is
powered on without sufficient access to cool air.
3.
Use a Phillips-head screwdriver and 4 truss-head screws (10-32 X 0.625) to connect
the brackets of the MPS assembly to the rack.