Appendix C: RS-422 VTR Interface
RS-422 Interface Kit Assembly and Installation
325
Lightspeed Live Capture User Guide
When all connections are complete between the RS-422 Interface Box, the VTR, and the
Lightspeed Live server, the VTR connection will be initialized and CH1 (Channel 1) of
the RS-422 Interface Box automatically synchronizes with SDI Input 1 on the
Lightspeed Live server, CH2 with SDI 2, CH3 with SDI 3, and CH4 with SDI 4.
Creating the Tape Capture Workflow
To enable capture of data from the VTR, configuration settings must be made in both
the Vantage Management Console and the Vantage Workflow Designer >
Tape
action.
Configuring Settings for Your Facility
, and
Activating the Tape Action Workflow
chapter for detailed instructions.
RS-422 Connector Pin Assignments
Use the pin assignment diagram below if you want to create custom RS-422 cables for
your Lightspeed Live Capture’s USB to RS-422 Interface Box.
