1
MPH200
series video encoders
user manual
General
MPH
series encoders are ONVIF (Open Network Video Interface Forum)
compliant products. This provides wide interoperability with any ONVIF
compliant device or system.
Many similarities exist between the
MPH
series video encoders; the main
difference being the number of video channels available and the mechan-
ics.
MPH
series video encoders are high performance video processing
products encoding real time video in mission critical applications for
customers in Transportation, City Center Monitoring, and Corporate
Security.
MPH200
series encoders are temperature-hardened compact
size stand-alone video processing products in the
MPX
platform.
MPH200
series video encoders provides in addition to transparent link
of
CVBS
or
HD-SDI
video signal up to
1080p
resolution (SMTP292M),
independently configurable general-purpose bi-directional asynchronous
data, bi-directional audio channels and bi-directional contact closure
channels. Additionally a layer 2 manageable Ethernet switch is inte-
grated into the encoder. The Ethernet switch comes with four gigabit
ports and full-feature layer 2 switching functions such as RSTP, IGMP,
QoS and VLAN.
The encoded signal from
MPH
series encoder can be decoded with
MPC/
MPX
(except H.264) or
VMX
series HW and/or SW, as well as with industry
standard SW players such as Quicktime and VLC. The transmission is
accomplished over 10/100/1000BASE-T or 100BASE-FX (SFP) or
1000BASE-X (SFP) network utilizing IP/Ethernet streaming.
MPH series video encoders are equipped with the
H.264
,
MPEG-4
,
MJPEG
and
MPEG-2
video encoding engine. The default encoding
combination is H.264, MPEG-4 and MJPEG. MPEG-2 is an add-on
option, and it should be ordered separately.
The
H.264
video encoding engine is compliant with the ISO/IEC 14496-10
(H.264@MP, BP, CBP) standard. The
MPEG-4
video encoding engine is
compliant with the ISO/IEC14496-2 (MPEG-4@SP/ASP L5) simple profile
standard. The
MJPEG
video encoding engine is compliant with the ISO/
IEC 13818-2 (RFC 2435) standard. The
MPEG-2
video encoding engine is
compliant with the ISO/IEC13818 (MPEG-2 MP@ML) standard.
General-purpose asynchronous data channels are transferred sepa-
rately from the encoded video signals.
Firmware version
The functionality and operation of the devices described in this manual
applies for firmware version
6.0.x
.
Stand-alone video encoder with 1 or 2 video inputs, bi-direc-
tional data, audio & contact closure ch Ethernet switch
MPH series video encoders introduction
Note
! This product is under
development and Teleste
reserves the rights to alter
specifications, features,
manufacturing release dates and
even the general availability of
the product at any time.