Wi-Fi & Ethernet extension using
existing Cable TV wiring.
Coax Cable
Main CATV feed
into Home
Ethernet
The first EOC adapter needs to be connected to the Cable Modem, Via an
Ethernet patch cord, to get an Ethernet signal into the system.
A connection from a spare OUTPUT on the CATV distribution amplifier to the
CABLE IN connection on the EOC adapter. It is essential that the first EOC adapter
is only connected to an OUTPUT port of the amplifier, as the Ethernet over coax
signal cannot pass through the amplifier.
At the EOC04 Wi-Fi extender, connect the ‘CABLE IN’ socket to the wall outlet.
Use the supplied COAX fly lead to then remake the connection to the TV or set
top box, so that the signal is passing through the EOC04.
Connect any Ethernet devices – Smart TV, IP Set top Box etc. using an Ethernet
patch cord.
Power up the EOC device – the unit will take between 10-15 seconds to boot up
and stabilise.
See section 8 - ‘Set up and configuration’ for more details.
EOC04 WiFi
Extender
SMART TV With Ethernet
Connection from EOC04
EOC04 WiFi
Extender
Set top box with Ethernet
connection from EOC04
First EOC adapter
Gateway Router
Distribution
amplifer
6