![background image](http://html1.mh-extra.com/html/teleste/easi-ind101/easi-ind101_user-manual_1082208021.webp)
Video Page
Picture 15
.
Commander’s “Video” page view.
On the
Video
Page you can confi gure the physical
monitor interface.
Video Format
EASI
TM
Decoders support
PAL
and
NTSC
video standards.
This setting should match with the video connected to the input
of the EASI
TM
Encoder
.
Test Picture
In case of a lost signal the Decoder keeps repeating the last
picture. On the screen it means a still picture. The still picture
can be avoided by ticking the checkbox “
Show test picture on
error
”. This setting allows the Decoder to switch on the test
picture automatically after a certain period.
Delay window presents the time the Decoder waits before it
turns on the test picture after signal synchronisation is lost. The
time is settable between 1…600 s and the recommended value
is below 10 seconds.
ON/OFF button
This button allows you to turn on/off the test picture manually.
This feature can be used to check and set the monitor
confi guration even if there is no received video signal. It is not
allowed to turn off the test picture if there is not a valid signal.
IND1x1 Series User Manual rev001 19