Teleste CFO100 User Manual Download Page 3

CFO100

 

user manual 

1

Welcome, and thank you for purchasing Teleste’s CFO products.

General

CFO100

 First Mile series offers a highly cost-effective single channel 

composite video transmission over one multimode fibre.

High quality video image can be transmitted over distances up to  

6.5 km depending on the type of multimode fibre in use. A typical 

application is a point-to-point transmission from a fixed CCTV camera to 

a monitoring centre. 

CFO100 series consist of mini sized stand-alone video transmitter 

followed by standard 5HP size CFO cards for triple channel video 

transmitter as well as for single and triple channel receiver operation.

The CPT101 stand-alone transmitter is temperature hardened and is 

capable of using both 12 VDC or 24 VAC supply voltage.

CPT101 unit is a compact size housing for special stand-alone 

installations requiring minimal installation space. Also as an 

optional DIN rail mounting is possible (item code CIK001).

CRT103 and CRR101/103 cards are compatible with all CFO rack 

systems. Stand-alone options are available with the CMA015 

module adapter and separared CPS25x series mains adapter.

As with all CFO platform products these specific models do meet 

 

all typical EMC as well as other environmental and manufacturing 

related requirements. The permitted operational temperature range  

is -34...+74°C.

Note!

 New generation CFO100 products are based on digital 

transmission and are not therefore compatible with previous 

analog CFO100 series.

Features

>>

  Low cost video transmission

>>

  High performance uncompressed zero delay digital video transmission, 

SNR 65 dB typical, 10 bit video sampling

>>

  One CVBS (PAL/NTSC) video channel

>>

  Transmission over on one or three multimode fibre up to 6.5 km

>>

  Card format applicable both for rack mount and stand-alone installations

>>

  One and triple channel units available for both transmitter and receiver

>>

  Transmitter unit available in a special compact-size stand-alone design

>>

  Feasible for field hardened operation

>>

  Mechanically compact and ruggedised

>>

  EMC and environmental conformance

CFO100 - Single and triple channel video only link

CFO100 First Miles series offers a 10-bit video transmission over 

one mutimode fibe / video channel for fixed camera applications.

V

x1

V

x1

V

x1

V

x1

Summary of Contents for CFO100













Reviews: