8
CFO100
user manual
CRR101/103 stand-alone installation
The units can be installed for stand-alone use by using a
CMA015
(installation for one 5HP wide units) module adapters. To insert a
CRR101/103
card unit into the module adapter, push the unit along the
guide rails into module until the unit is firmly attached. Secure the
plug-in unit with the upper and lower locking screws. The stand-alone
unit should be mounted to a vertical surface.
The permitted supply voltage range is 10.5...14 VDC. The current
consumption for
CRR101
is 130 mA and for
CRR103
300 mA.
The permitted operational temperature range is -34...+74°C.
Note!
Alternatively the units can be installed for stand-alone use by
using a
CMA025
(installation for two 5HP wide units) or
CMA035
(installation for three 5HP wide units) module adapters.
The 12V DC supply voltage is supplied by the means of a separate
mains adapter with a regulated output, (e.g.
CPS251
).
Please refer to
separate documention for module adapters and mains adapters.
For limited space installation the
CMA015/025/035
module adapters can
be rear-mounted by means of an optional installation kit
CIK002
.
CPS251
12VDC mains adapter.
CMA015
module adapter.
CMA025
module adapter with
CIK002
rear mounting kit.
1. CMA025 module adapter
2. CIK002 rear mounting kit
DC
connection polarity
210.9
133
35.5
CMA
CPS
1
2
