BRILLANTE User Manual, 59300023, rev005 Establishing
a
Data Connection
•
9
subnet mask 255.255.255.0 correspondingly
16 bits would define the mask 255.255.0.0
via
Mandatory key word.
gateway
Address of your router to the network.
If also eth1 needs static routes then type:
pico -w route-eth1
Continue as in the case of eth0.
***************************************************
Following lines of static-routes below has been left here for
old compatibility reasons and is not applicable with the
IBM hardware but only with the older DELL hardware.
When the ETHERNET connection(s) are reconfigured,
continue by entering:
pico –w static-routes
Edit file in PICO text editor. The file may be empty but you
need to add the following lines depending on the current
network configuration.
where:
net = network
netmask = subnet mask
gw = gateway or router
***************************************************
Rebooting
Reboot by entering:
reboot
Confirm by typing your own user password
system
or
admin
(same as you entered when logging in)
eth0 net
xxx.xxx.xx.x
netmask
xxx.xxx.xx.x
gw
xxx.xxx.xx.x
eth1 net
xxx.xxx.xx.x
netmask
xxx.xxx.xx.x
gw
xxx.xxx.xx.x
