4
4)
Hooking up a receiver
The CWR-880 decodes audio signal fed from a receiver. Connect the AF IN terminal of the
CWR-880 and the headphone output terminal of the receiver with the attached audio cable.
5)
Hooking up key
Connect the KEY IN terminal of the CWR-880 and the contact terminal of the key with the at-
tached earphone plug. Prepare a shielded wire or a 2-core cable for the connection by yourself.
6)
Connection for KEY OUT signal
Connect the KEY OUT terminal of the CWR-880 and the KEY terminal of the transceiver with
the attached earphone plug. Prepare a shielded wire or a 2-core cable for the connection.
7)
Hooking up a printer
Centronics- compatible printer of parallel interface can be used with the CWR-880. This means
that the CWR-880 can use almost all printers which are used with personal computers. A print-
er is to be connected with the printer cable available as an optional accessory.
Since LF is the only code for line feed on the CWR-880, set up the printer to enable printing
with line feed.
