Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 14 von 61
RCTouch_UserGuide_V2.1.1.doc
7.2 Functionality of components
Functionality of the components is impaired by certain conditions such as moisture, darkness,
heat or cold, mechanical action, dirt or similar. Observe therefore the points described in chap-
ter 5 Maintenance provisions and safety regulations.
7.2.1 Ports
The ports are used to connect the RCTouch, for example with the power supply (see section
7.4.1).
Port
Cable
Connection with …
No. Designation
1
8-pol LEMO socket
Power cable with Lemosa connector to
banana plug or
Power cable with Lemosa connector to
DIN plug
Power source
2
Gbit Ethernet (RJ45)
Gbit Ethernet cable
Client computer or
data logger
3
4
Mini USB 2.0
Micro USB connecting cable
USB devices
5
4-pol audio jack plug
stereo out/microphone
(3.5 mm) OMTP
3.5" jack/audio cable
Microphone, speak-
er, headset, etc.
Table 7.1: Available connections
7.2.2 Brightness sensor
The brightness sensor helps adjust the display's backlight depending on the ambient light. It
serves only the automatic regulation and is permanently active.
7.2.3 Home button
The Home button is used to switch the device on or off. It can also be used to switch between
applications and to wake up the device from sleep mode.
7.2.4 Speaker
The speaker is used to play voice notes. Its volume is adjustable.
