Remote Control Touch
User Guide
Datum: 08.12.2015
Seite 8 von 61
RCTouch_UserGuide_V2.1.1.doc
5
Maintenance provisions and safety regulations
Note according to standard EN55011:2009
The device is used in an industrial environment. Due to the occurring, conducted as well as ra-
diated disturbances it possibly can be difficult to ensure electromagnetic compatibility in other
environments.
Cleaning
The device may only be cleaned with a clean cloth slightly dampened with water. Other cleaning
agents such as gasoline, alcohol, etc., may not be used.
Maintenance
The device is maintenance-free. The case must not be opened by the customer. Unauthorized
modifications will void the warranty.
In case of failure, the customer may change the fuse on the cable set or fuses accessible from
outside only. The fuse may only be replaced with a fuse of the same type and nominal current
rating.
Storage
The device may only be stored within a temperature range of - 40 °F to + 185 °F.
Disposal
Disposal of the device must be in accordance with the statutory regulations.
5.1 Operating conditions
5.1.1 Temperature
The device must not be operated outside the specified temperature range. Adequate ventilation
must be ensured. The device must not be placed too close to walls or other devices. The device
must not be stacked with other components on each other unless proper ventilation is ensured
and the device is to be operated at an ambient temperature of more than 77 °F.
5.1.2 Condensation
The device must not be switched on immediately when brought from cold ambient conditions
into a room with normal ambient conditions.
5.1.3 Environment
The device must not be used outdoors or in adverse ambient conditions such as moisture, high
humidity or dust. Operation of the device is further not allowed in an environment with flamma-
ble or explosive gases.
