Speaker & Mute Key Connecting & Status Indicators - # 15 & 16
Speakerphones are equipped with LED indicators to show the current feature key status.
• Press Speaker or Mute Feature Key to use that service - LED will light Green when
that key is IN USE.
Indicators...
Wall Mounting (optional)
The 3300 Series telephones is designed to
conveniently wall mount.
Please follow these easy steps:
1. The handset retaining clip must be
engaged to secure the handset when
hanging it up. To engage the clip, unsnap
the clip, rotate the clip 180 degrees and
then snap the clip into place.
# 3
2. Plug one end of a short line cord into the
line jack on the back of the base unit
# 8
.
Plug the other end of the line cord into
the wall jack.
# 27
Wall Mounting...
5
10
3. Attach the Wall Mount Bracket on to the
back of the phone, placing mounting clips
into brackets slots - push in place until
you hear them snap into place.
# 25
.
4. Next, guide the phone with wall mount
wedge
# 26
onto the studs of the wall
jack. Press down rmly until you feel
it snap into place. The unit is now wall
mounted.
Please call PriorityCare to order Wall
Mounting Wedge and Short Line Cord:
+1.719.638.8821 USA
+44 (0) 1908 682180 Europe
+971 4 2676559 Middle East
# 8
# 27
# 26
# 25
# 3
Features...
Using the Mute Feature on Speakerphones - # 16
A “Mute” key is provided to allow privacy during a background conversation. When the
“Mute” key is activated, the microphones in the handset and speakerphone are disabled.
When the “Mute” feature is activated, the caller will not hear your voice. The “Mute” key
will light to show that the feature is activated. To de-activate, press the “Mute” key again.
(Does not apply to non-speakerphones)
Using the Conference Key on Speakerphones - # 14
The “Conf.” key is used to establish a 3-way conversation. The conference feature is
activated by a “soft” key that will automatically reset when hung up.
A 3-way “Conference” call can be established while using either the handset or speaker-
phone. To use the “Conf.” feature:
1. Place the line that is currently in-use on Hold by pressing the “Hold” key.
The line status indicator will turn from Green to Red.
2. The second call can be established by selecting the idle line key and dialing the call.
3. When the second call is established, activate the 3-way conference call by pressing
“Conf.” key. Line 1 and Line 2 will automatically “bridge” together and all three
parties can now converse.
4. To end the call, simply hang-up by placing the handset back in its cradle (on-hook)
or by pressing the “Speaker” key.
5. If you wish to continue speaking with one of the callers and wish to “drop” the other
caller, simply press the line key of the caller you wish to continue speaking with.
The other caller will automatically drop-off.
(Does not apply to non-speakerphones)
# 25
