19
Local SIP Port
：
The SIP port of this phone.
Load
：
Load the choices of SIP line.
Use Stun
：
Stun. Set the Stun that allows/forbids use user setting.
3.5.4 Net Service
HTTP Port:
configure HTTP transfer port; default is 80. User may change this port
to enhance system’s security. When this port is changed, please use
http://xxx.xxx.xxx.xxx:xxxx/ to reconnect.
Telnet Port:
configure telnet transfer port, default is 23.
RTP Initial Port:
RTP initial port.
RTP Port Quantity:
Maximum RTP port quantity, default is 200
Notice:
Settings in this page won’t take effect unless save and reboot the device.
If you need to change telnet port or HTTP port, please use the port greater
than 1024, because ports under 1024 is system remain ports.
HTTP service if HTTP is set to 0.
