9
“TS ID
5-4”
: User can configure the Transport Stream ID.
The range is from 1 to 65535.
Note: For single channel encoder, there is no this menu.
3.2.6 IP1 Setting
“Source
6-1”
: User can select the output source. There are 6
types of souce: none, enc1, enc2, enc3, enc4 and mux. None means disable this ip
output port.
“Source IP
6-2”
: The local IP Address setting.
“Source Netmask
6-3”
: Subnet Mask setting.
“Source Gateway
6-4”
: Default Gateway setting.
“Source MAC
6-5”
: Physical Address setting. It is a unique value
in any network.
“Source Port
6-6”
: The local IP port setting.
“Destination IP
6-7”
: Destination IP Address setting. The device
will auto send the TS data to this IP address.
“Destination Port
6-8”
: Destination Port setting. The device will auto
send the TS data to this port.
“Protocol
6-9”
: There are 3 types of protocol: UDP, RTP and
Pro-MPEG. If the protocol is Pro-MPEG, the next 2 menu would be valid.
“FEC Col Offset
6-10”
: It is valid only the protocol is Pro-MPEG. By
now, the range is from 4 to 16.
“FEC Col NA
6-11”
: It is valid only the protocol is Pro-MPEG. By
now, the range is from 4 to 16.
“IGMP
6-12”
: Default is disabling. It’s useless in normal
network.
3.2.7 IP2 Setting (Optional)
The menu is similar to IP1 Setting.
3.2.8 IP3 Setting (Optional)
The menu is similar to IP1 Setting.
