Telegesis
TG-ETRX2CF-PM-01-200
9
ETRX2CF v2
Product Manual
2.01
©2008 Telegesis (UK) Ltd
ETRX2CF Product Manual (Rev 2.01)
Figure 3. Pocket PC driver installation
5.2.2 Telegesis Terminal
Select “Download Telegesis Terminal PPC for PDA – ActiveSync”, download and unpack the file
TelegesisTermPPC.zip. Save it on your PC in order to execute it from there. Run the file
setup.exe; this will install TelegesisTermPPC.msi on the PC. Connect your PDA to the PC using
Active Sync and use ActiveSync to install the Software on your PDA by selecting Extra ->
Software.
Figure 4. TelegesisTermPPC.msi
5.3 Install drivers and Telegesis Terminal for PPC on a PDA manually
5.3.1 Drivers
Go to
www.telegesis.com/ZigBee/CFV2.htm
.
Select “Download Drivers for PDA only - CAB” and
download the driver file xTRXnCF_CABs.zip to your PC. Unpack it, transfer the appropriate
cabinet file to the mobile device and execute it there. It is a self-extracting cabinet file.
5.3.2 Telegesis Terminal
Select
“Download
Telegesis
Terminal
PPC
for
PDA
-
CAB
”
and
download
TelegesisTermPPC.CAB. Unpack it, transfer it to your PDA, and execute it there. It is a self-
extracting cabinet file.
5.4 Telegesis Terminal for PPC
The Telegesis Terminal Software for Pocket PC was primarily designed to showcase Telegesis
R2xx firmware on a Pocket PC. In essence, it is a miniature version of the Telegesis Terminal
program for PCs, through which a user can (i) establish and manage a PAN (ii) turn on the buzzer
and LEDs of other ETRX2 modules (iii) Send AT commands. Consult the AT Command Manual
for full details of the command set.
