Telegärtner DoorLine TM4, Operating And Assembly Instructions Manual

Page: 37 / 52

Overview of programming table
6
DoorLine TM4 37 / 52
6 Overview of programming table
The following table contains an overview of all programming commands. For
these programming commands, prior entry to configuration mode via the PIN
code is required.
When entering call numbers, note the Information on the entry of call numbers
[
} 19].
Programming command Own settings Description
##<PIN Code> Entry to configuration mode.
Factory setting of PIN Code:
0000
# à 00 Automatic adjustment to PBX
system
#
à
04 <Door opener func-
tion>
Door opener function:
0=disabled
1=enabled
Factory setting: disabled
# à 05 <Door opener time> Switching time for door
opener:
1 to 9 seconds or 0 (door
opening not possible)
Factory setting: 3 seconds
# à 07 <Call duration> Defining maximum call dura-
tion:
1 -9 minutes or
0=without limitation
Factory setting: 1 minute
# à 08 <Call duration> Call duration to extension line:
01-99 seconds (double-digit
entry)
Factory setting: 30 seconds
#
à
11 <Call number> Call number to be called
from bell pushbutton 1
# à 12 <Call number> Alternative number to be
called from bell pushbutton 1
# à 21 <Call number> Call number to be called
from bell pushbutton 2