Telefunken TM 260 COSI, Operating Instructions Manual

Page: 8 / 31

8
2. Press , then select Register in address book.
3. You have a choice between Add a new contact and Replace the existing contact. If you would like to create a
new contact, select the corresponding option. Validate
(When you select Replace, use the arrows to select the
contact and then press to attribute this new phone number to the selected contact while deleting the old
number).
4. Select the location where you will save the contact. You have a choice between saving On SIM or On Phone.
Validate
5. Use the arrow to respectively select the information to be modified: Name, Number. Use the keypad to enter the
information. Once the changes are made, press
to access the Options, then press OK to validate.
NOTE: The ringtone and picture for registered contacts can be personalised only on the phone.
When you are entering the information for the contact, use the arrow to select Ringtone. The M1 and M2 keys enable
you to choose from among the following options:
1. Default: when the contact calls, the ringtone will be the same for all calls in general
2. Dial tone/Ringtone: choose a ringtone for this contact from the 10 ringtones or a dial tone from the 5 dial tones that
are available on the phone.
3. Select from the file: choose a ringtone for this contact from the audio files on your SD card. Then press to
validate your choice.
1. Default: no picture for the contact
2. From the camera: press to access the camera, take a picture and attribute this picture to the contact.
3. Select from the file: choose a picture for this contact from the files on your SD card. Then press to validate your
choice.
Once all the information is entered, press to access the Options, then press OK to validate.
SAVING A NUMBER FROM THE CALL LIST
1. Press to access the call list
2. Use the arrows to select the number you would like to register, then press to access the options.
3. Use the arrow to select Save in address book , then press to validate.
4. Select New contact and press to validate. To create the contact the procedure is the same as in point 2 of the
previous section.
NOTE: If you would like to add a number for an existing contact
1. Use the arrows to select Replace existing , then press to validate.
2. Use the arrows to select the contact whose number you would like to replace , then press to validate.
to validate. Please note that by replacing the number, the number
previously registered for this contact will be permanently erased.
5. Press to validate.
HOW TO ACCESS AND USE THE ADDRESS BOOK
In the Address book you can register your contacts and their phone numbers. Contacts can be registered on the SIM
card, on the phone or both. The phone memory can hold up to 500 contacts.
To access the address book, go to the Main menu and then use the arrows to select Contacts.
You can also access the Address book by pressing in standby mode.