Telefunken TF-PS2101, Instruction Manual

Page: 4 / 16

Instruction manual
3
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit
• Do not
e
xpose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves
Refer servicing to qualified service personnel
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
Power supply
• The unit operates on an internal
rechargeable Li-ion battery and 220V
mains via power adapter (not included).
• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.
General operation
• You can connect the audio output of an
external device to this unit, to listen to the sound
of that device through the speaker.
• To connect an external audio device,
please use the supplied 3.5mm-3.5mm mini
jack audio cable to connect the external
device to the AUX input of this unit.
• Press
M button to select the AUX mode.
• Turn on the external device. You can
Bluetooth wireless playback
•
This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
•
The wireless range is approximately within
10 meters in direct line of sight .
•
Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO
THIS UNIT:
•
Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
•
Switch on the unit and press the
M
button repeatedly to select the Bluetooth
mode (selected by default).
• Once the Bluetooth pairing indicator
begins flashing, you will find the unit listed in
the Bluetooth connections list of your device
(as TF-PS
210 1 ).
•
If asked for a passcode, enter “0000”.
•
The initial setup is required only once
per device. The unit will automatically pair to
the last paired device.
•
The LED indicator will flash when
searching for a Bluetooth device and stay
on when the devices are paired.
• When playing files, you can press
button to pause and resume the
playback.
•
Press the or button to go
to a previous or next track. Press and
hold these buttons to decrease or
increase volume, respectively.
External device connection
• Put the OFF/ON switch into the ON
position to switch the unit on. Put it into
OFF position to switch off.
• The battery can be recharged with the
provided USB charging cable. Before first
plugging the appliance check that voltage
indicated on the rating label corresponds
to the mains voltage
at your home.
• Insert the charging cable into the
DC 5V socket on the unit.
• Connect the charging cable to a power
adapter (not included) . Plug the
adapter to the power source.
adjust volume by pressing the
corresponding buttons .
Slight noise during playback pauses
is not a construction defect, it is determined
by the factory presets of the dynamic noise
reduction system.