Telefunken TF-LED28S18, Instruction Manual

Page: 4 / 32

Before you start
4
4
Before you start
medicine and any container with water on
this product. If the liquid is spilt, it may cause
the fire, electric shock or breakdown.
• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.
• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.
• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.
• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left and right of the TV.
• Please place all the signal cords behind of
rear panel.
• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.
• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, the damaged
power cord, connection cable or connection
terminal may cause the fire, the electric shock
or breakdown.
• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it may damage it.
• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.
All images provided herein are schematic
drawings and may differ from of real objects.
Wall or ceiling mounting implements
must be durable and sufficient enough to
support the weight of the unit.
Installation
Wall mounting
For wall mounting the back panel of this
unit is equipped with 4 holes; screw the 4
supplied hexagonal bolts into the holes. Now
the screw holes on the hexagonal bolts (200
mm horizontal and 100 mm vertical spread
distance) can be used for fixing the wall-
mounting bracket. The wall-mount bracket is
not included and should be acquired separately.
Manufacturer is not responsible for improper
mounting resulting in damage of the unit.
Stand installation
Align the holes in the stand and base and
fix them by 4 supplied screws. Fix the stand
assembly with 4 supplied screws to the holes
in the bottom part of the back panel as shown
below