Telefunken Digicadre 7111BW, User Manual

Page: 12 / 49

With the remote control
With the frame
3. Switching on
Press the ON/OFF button at the back of the frame : the slide-show begins after a few
seconds
4. Choosing the image source
With the remote control
When the frame is in slide-show mode and photos are being displayed, point the remote
control (fig.3) at the frame and then press EXIT twice. The screen on the left appears
(fig.4). Select the desired source (memory card or internal memory) with the left and right
arrows of the remote control (fig 3), then press the remote control’s "ENTER" button to
confirm your choice. Press “ENTER” again to launch the slide show that you have
chosen.
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
Fig.4
Fig.3
13