Revision Date | July 10, 2017 || Document Number | UM-E71-308-01 || Rev C
17 of 48
The IAP CLI becomes available after completion of the startup process, and requires administrator
credentials to start a session. The default credentials are:
User:
admin
Password:
admin
After login, the privileged command mode is enabled which provides access to
show
,
clear
,
ping
,
traceroute
, and
commit
commands. The configuration commands are available in the configuration
(config) mode. To move from privileged mode to the configuration mode, enter the following command at
the command prompt:
(Cabin Ace) # configure terminal
The configure terminal command allows you to enter the basic configuration mode and the command
prompt is displayed as follows:
(Cabin Ace) (config) #
Some commands in configuration mode allow you to enter into a sub-mode to configure the commands
specific to that mode. When you are in a configuration sub-mode, the command prompt changes to indicate
the current sub-mode.
You can exit a sub-command mode and return to the basic configuration mode or the privileged Exec
(enable) mode at any time by executing the
exit
or
end
command.
You can use the question mark (?) to view the commands available for your current mode.
Refer to the
Aruba Instant 6.4.4.4-4.2.3.0 CLI Reference Guide,
for additional information on the IAP CLI.
