TeleEye RM134, Quick Start Manual, Page: 9 / 9

Carefully follow the steps to ensure correct installation.
*** Note: Please set the HDD to “Master Mode” or “Single Mode” ***
• Open the upper cover of the DVR and screw out the bracket.
• Screw HDD to the HDD bracket. (Refer to Fig.1 & 2)
• Connect the HDD to the power connector and IDE BUS (make sure to align
the HDD precisely for pin connection)
And then screw the HDD bracket onto the DVR base. (Refer to Fig. 3)
• Close the upper cover of the DVR. (Refer to Fig. 4 & 5)
Fig. 1
Fig. 2
Fig. 3
Fig. 4 Fig. 5
8
! " # $
8 7 6 5 4 3 2 1
15 14 13 12 11 10 9
16 17
PIN 1.
RS232-TX
RS232-TX
PIN 2.
RS232-RX
RS232-RX
PIN 3. ~ PIN 6.
ALARM INPUT
ALARM INPUT
PIN 7.
EXTERNAL ALARM NC.
EXTERNAL ALARM NC.
PIN 8.
EXTERNAL ALARM NO.
EXTERNAL ALARM NO.
PIN 9. GND GND
PIN 10. RS485-B RS485-B
PIN 11. RS485-A RS485-A
PIN 12, 13.
PIN OFF PIN OFF
PIN 14.
ALARM RESET
ALARM RESET
PIN 15.
EXTERNAL ALARM COM
EXTERNAL ALARM COM
PIN 16, 17.
GND
GND
Note: The images shown above may differ from the actual product appearances.