NX User Guide
PAGE 22
Connecting
NX173/NX288/NX589/NX599/NX301
4.
Connecting
NX173/NX288/NX589/NX599/NX301
4.1. Configuration
Step 1:
Double click the [TeleEye IP Setup Utility] icon on the Windows desktop to
run the utility.
Step 2:
The list on the left shows the NX network cameras inside the network of the
PC. By comparing the [Serial number] column with the serial number of the
camera to be configured, click on that row. The basic information such as IP
address and model number is shown on the right.
Note:
If the camera is not found, try to press the [Refresh] button and wait for a
while.
Step 3:
To use another port number instead of the default port, enter the desired port
number in the [Port] field.
Step 4:
To specify another IP address, mask or gateway, un-tick the [Obtain an IP