NX User Guide
PAGE 19
Hardware
Installation
RS485 out: 2-way terminal block for connecting a PTZ camera
7.
DC output: Supply 12V, 0.5A DC to camera.
Installation / Configuration
Two configurations are available:
Configuration 1: Through Ethernet network
Tele
Eye
NX301
210.17.139.146
Tele
Eye
SF373
Internet
Network Switch / Router
with PoE supported
Straight-through
Ethernet cable
Video cable
Power cable
Step 1:
Connect a camera to NX301 with video cable
Step 2:
Connect NX301 to a router/switch with a Ethernet cable
Step 3:
If the router/switch does not support “Power over Ethernet (PoE)”, connect
NX301 with a power adapter
Step 4:
When power is applied, the front panel LED is flashing. Wait for around 1
minute for the LED to light continuously.
Configuration 2: Through 3G network
Power Adapter
Tele
Eye
NX301
210.17.139.146
Tele
Eye
SF373
Internet
Video cable
Camera’s
DC Adapter
USB 3G Data Modem
USB cable
Step 1:
Connect a camera to NX301
Step 2:
Connect NX301 to a USB mobile data modem
Step 3:
Connect NX301 with a power adapter
Step 4:
When power is applied, the front panel LED is flashing. Wait for around 1
minute for the LED to light continuously.