Tele
Eye
III+
VX
I
nstallation Guide
Page 27
Installation of
Tele
Eye III+
VX
for Remote Monitoring
External port
1024
Internal IP
192.168.0.2
Internal port
1024
2.
The IP address assigned by the ISP to you through ADSL modem is dynamic, which means
it will change after certain period of time. In order to make the
Tele
Eye
III+
VX
addressable, you need to apply for our proprietary
sureLINK
service. Procedures involved
are listed in appendix A.
3.
After successful application of
sureLINK
service, you will obtain a
sureLINK
address,
for example “www.your_site.your_company.teleeye.net”.
4.
Follow the steps below to set the
sureLINK
address and DNS name into
Tele
Eye
III+
VX
.
5.
DNS address enables your
Tele
Eye
III+
VX
using the
sureLINK
address to update its IP
address to TeleEye’s
sureLINK
server, the refresh rate indicates the time duration for
updating. Duration of 15-45 minutes is frequent enough.
6.
After finish all configurations, power resets the
Tele
Eye
III+
VX
to make the new values
effective.
[ NETWORK SETUP ]
TRANSMITTER IP
. . .
SURELINK
. . .
PROXY SERVER
. . .
GATEWAY IP 192.168.0.1
BUILT-IN WEB SERVER ENABLED
BACK
•
Press [Menu] button to enter the
[MAIN MENU]
, and then select
[TRANSMITTER SETUP] ->
[NETWORK SETUP]
•
Use the arrow button to select
[SURELINK]
item, press
[Enter]
to
popup the
[SURELINK SETUP]
menu
[ SURELINK SETUP ]
ENABLE
NO
ADDRESS WW…TELEEYE…
REFRESH RATE (MIN) 15
DNS SERVER 1
0.0.0.0
DNS SERVER 2
0.0.0.0
BACK
•
Select the
[ENABLE]
item, then use
the left and right arrow button to select
YES
•
Enter the
[ADDRESS], [DNS
SERVER1], [DNS SERVER2]
item,
and change them to the correct value
•
Exit all menus to save the settings
