Tele
Eye
Dialup CCTV
I
nstallation Guide
Page 9
Installation of
Tele
Eye
Dialup CCTV
3.
Power on
DT-103G
by insert the power jack.
4.
After power up, the blue PWR LED will blink 6 times and then remains on indicates
system boot up. The PWR LED and the status LED L1, L2, L3 will be on/off
according to the state of DT-103G.
5.
Now the
DT-103G
is ready for dialing. See section G for access the
Tele
Eye
Dialup CCTV
from PC for video monitoring.
PSTN Version : DT-103P
Plug in the power adapter jack with
12VDC supply
During power up, L1, L2 and L3 will
blink/scan according to the operation
mode. Please see appendix C for
GSM status LED indication
PWR: blue
L1, L2, L3 : red/green blinking when no SIM
Check Signal Level
Check SIM card
Scanning Network
Standby
No network
No SIM /
SIM error
PWR: blue blink 6 times
L1, L2, L3 : orange
PWR: blue
L1, L2, L3 : green scanning
PWR: blue
L1, L2, L3 : depends on signal strength
PWR: blinking depends on signal strength
L1, L2 : off
L3: green
System Power up
