181-122018_THCD-101 Instruction Manual
Page 6 of 26
Features
± (0.02% R 0.01% FS) Accuracy.
The displayed valued is a highly accurate representation of the
analog input value.
0-5 Vdc, 0-10 Vdc Set Point Via Front Panel Or Digitally (USB/Ethernet).
The desired control setpoint can be
set locally or via a remote computer.
Dual Programmable Alarms with Relays.
The THCD-101 provides two double throw relays with 2A (@30 Vdc)
switching capacity and 220Vdc max switching voltage.
USB, Ethernet and Analog Output (Standard).
The THCD-101 has multiple ways to provide the user with a
remote indication of the controlled parameter.
6 Digit Graphical Display.
The display provided with THCD-101 can provide the user simultaneous indications
of the magnitude of the controlled parameter, unit of measure, valve over-ride status and alarm status.
Specifications
WARNING
: Do not operate instruments exceeding the specifications listed below. Failure to
heed this warning could result in serious personal injury and/or damage to the equipment.
Display Range:
6
-digit value including decimal point, 99999 max value
Analog Input
-10.8 Vdc
→
+10.8 Vdc,
Input Impedance > 100 kΩ
Measurement Accuracy:
±(0.02% R 0.01% FS)
Setpoint Output
0 – 10 Vdc, Accuracy
±(0.03% R 0.01% FS)
Operating Temperature:
5°C to 60°C
Humidity:
max 90 %RH @ 50°C, non-condensing
Power Requirements
:
24 VDC ±5%, 600 mA minimum
Class 2 power 150 VA max fused
NOTICE:
Use of an underpowered or under-voltage supply could result in equipment damage.
CE Mark
EN55011, EN61326, EN61010
RoHS Compliant
YES
Weight (approx.)
:
0.44 lb. (0.2 kg)
Dual Alarm Relays:
2A (@30 Vdc) switching capacity and 220Vdc max switching voltage
Connectors
:
2.1 x 5.5mm bayonet-style power jack (power)
15-pin “D” connector (Transducer connection)
15-pin high density “D” connector (Relay connections)
USB type-C (virtual COM port for serial communications)
RJ45 (Ethernet communications)
