2.6 LAN Setting
Operation
：
1. Connect the T3PS3000 PSU to your local area network using the network
cable.
2. Press the “
IP/Store
” button to enter the LAN setting interface.
3. Press the direction button to go to the DHCP line. Turn the multi-function knob
to turn the DHCP ON/OFF, then press the multi-function knob to make the
setting effective
●
ON:
t
he DHCP server in the current network will assign the network
parameters (such as the IP address) for the instrument.
●
OFF:
you can manually set the IP address, subnet mask, and gateway.
➢
Turn the multi-function knob to change the digits.
➢
Press “Fine” to select the digit position.
➢
Press the direction button to move the cursor around.
➢
Press the multi-function knob to store the setting.
(The setting is effective only when the knob is pressed)
The left side of the interface will display the current network settings when
setup is completed.
4. Press “
IP/Store
” again to exit the current interface and return to main interface.
Quick Start 17
