Appendix C
Warranty/Repair Questionnaire
T200U/UP and M200EU/EUP
(06863B, DCN6247)
TELEDYNE API CUSTOMER SERVICE
EMAIL:
PHONE: (858) 657-9800
TOLL FREE: (800) 324-5190 FAX: (858) 657-9816
C-1
CUSTOMER: ____________________________________ PHONE: ___________________________________________
CONTACT NAME: _______________________________ FAX NO. ___________________________________________
SITE ADDRESS: ______________________________________________________________________________________
MODEL SERIAL NO.: ____________________________ FIRMWARE REVISION: _______________________________
1.
ARE THERE ANY FAILURE MESSAGES? ____________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
PLEASE COMPLETE THE FOLLOWING TABLE:
(NOTE: DEPENDING ON OPTIONS INSTALLED, NOT ALL TEST
PARAMETERS SHOWN BELOW WILL BE AVAILABLE IN YOUR INSTRUMENT)
*IF OPTION IS INSTALLED
PARAMETER RECORDED
VALUE ACCEPTABLE
VALUE
RANGE
PPB
50 PPB TO 2,000 PPB
NOx STAB
PPB
0.1 PPB WITH ZERO AIR
SAMPLE FLOW
CM
3
1,000 ± 100
OZONE FLOW
CM
3
80 ± 15
PMT SIGNAL WITH
ZERO AIR
MV -20
TO
150
PMT SIGNAL AT SPAN
GAS CONC
MV
PPB
0-5,000MV
0-2,000 PPB
NORM PMT SIGNAL AT
SPAN GAS CONC
MV
PPB
0-5,000MV
0-2,000PPB
PREREACT
MV -20
TO
150
HVPS
V
400 – 900
RCELL TEMP
ºC
40 ± 1
BOX TEMP
ºC
AMBIENT ± 5ºC
PMT TEMP
ºC
5 ± 2ºC
MF TEMP
ºC
40 ± 1ºC
U/EU models only:
MOLY TEMP
ºC
315 ± 5ºC
UP/EUP models only:
O3KL TEMP
ºC
200 ± 5ºC
RCEL PRESS
IN-HG-A <4”
(CONSTANT)
SAMP PRESS
IN-HG-A
~ 1-5” < AMBIENT (CONSTANT)
NOx SLOPE
1.0 ± 0.3
NOx OFFSET
-50
TO
50
NO SLOPE
1.0 ± 0.3
NO OFFSET
-50
TO
50
ETEST
PMT MV
2000 ± 1000
OTEST
PMT MV
2000 ± 1000
Values are in the Signal
I/O
REF_4096_MV
MV
4096mv ±2mv and Must be Stable
REF_GND
MV
0± 0.5 and Must be Stable
06861C DCN6670