Teledyne Sierra M6-2, User Manual, Page: 163 / 538

Sierra M6 ‐ 2 SAS/SATA Protocol Analyzer User Manual 161
Emulation Teledyne LeCroy
2.9.5 Initiator Setting Tab (SAS only)
The Initiator Setting tab allows you to select the Port(s) for generating SAS traffic and to
specify SAS Address, Data Frame Payload size, Frame Receive Timeout, Logical Block size,
and ATA Command Execution Time out (see
Figure 2.171 on page 161 ).
You can run a Pattern Generator. To run the Pattern generator, check the Run Pattern
Generator option button and select a Pattern Generator File. You can create Pattern
Generator Files (see “Creating a Pattern Generator File” on page 519 ).
Figure 2.171: SAS: Initiator Setting Tab
Choose Initiator Emulator Port
For each port, select a speed, and then click the Speed Negotiation Setting button (see
Figure 2.172 on page 162 ).