background image

Test Point Number

Test Point Name

TP2

6.5V

TP3

5V_REG

TP4

3.3V_HOST

TP5

PERST

TP6

CLKB_P

TP7

CLKB_N

TP8

IFDET

TP9

DUALPORTEN

TP10

12V_DC_JACK

TP11

12V_SATA

TP12

5V_SATA

TP13

5V_3.3V

Test Point Number

Test Point Name

TP14

12V

TP16

3.3V_SATA

TP17

5V

TP18

3.3V

TP19

12V_8_PIN

TP20

12V_6_PIN

TP21

12V_MOLEX

TP22

5V_MOLEX

TP23

GND

TP24

GND

TP25

GND

Copyright

© 2013 Teledyne LeCroy, Inc. All rights reserved.

Part Number: 925259-00   Rev B

This document may be printed and reproduced without additional permission, but all copies 

should contain this copyright notice.

Trademarks and Servicemarks

Teledyne LeCroy is a trademark of Teledyne LeCroy. All other trademarks are 

property of their respective companies.

Changes

Product specifications are subject to change without notice.

Teledyne LeCroy reserves the right to revise the information in this document 

without notice or penalty.

Teledyne LeCroy Customer Support

Online Download

Periodically check the Teledyne LeCroy Protocol Solutions Group web site for 
software updates and other support related to this product. Software updates are 
available to users with a current Maintenance Agreement. 
Mail:

3385 Scott Blvd., Santa Clara, CA 95054-3115

Web: teledynelecroy.com/tm/Library/software/PSG           

E-mail: [email protected]

Tel: 

(800) 909-7112 (USA and Canada)                               

Tel:

(408) 653-1260 (worldwide)

Fax:

(408) 727-6622 (worldwide)

6

Available Test Points

Environmental Conditions

Temperature: Operating 32° F to 122° F (0° C to 50° C) 

Temperature: Non-Operating 14° F to 176° F (-10° C to 80° C)

Humidity: Operating 10% to 90% RH (non-condensing)

7

Summary of Contents for LeCroy

Page 1: ... SFF 8639 Adapter works up to X2 since only Lanes 0 and 1 are routed in the PCB from the PCIe edge connector to the Port B of the SFF 8639 connector SFF 8639 Single Port Adapter Card 1 Components The adapter package includes the following components SFF 8639 single port Adapter card Power supply 12V 3A Quick Start Guide this document Inspect the received shipping container for any damage Unpack th...

Page 2: ... 1 4 SW8 shunts 1 3 See the tables below to source the correct power for the DUT 3 Make sure only switch 2 from the DIP switch array SW1 is in the on position The PRSNT pins configuration is X1 or X4 device is selected using SW1 according to the table 4 Plug the adapter with the device under test in any PCI Express slot 5 Connect the power supply to the external power jack J3 if needed PCI Express...

Page 3: ...ector 2 8 12V from DC Jack J3 3 9 12V from 6 pin connector J8 4 10 12V from 8 pin connector J9 5 11 12V from SATA connector J11 6 12 12V from Molex connector J10 Shunt 3 3V 5 0V Selection 1 2 3 3V 2 3 5 0V Shunt 5V Source Selection 1 4 5V from Internal regulator 2 5 5V from Molex connector J10 3 6 5V from SATA connector J11 Shunt 3 3V Source Selection 1 3 3 3V from Host PCIe Edge connector 2 4 3 3...

Page 4: ...ir respective companies Changes Product specifications are subject to change without notice Teledyne LeCroy reserves the right to revise the information in this document without notice or penalty Teledyne LeCroy Customer Support Online Download Periodically check the Teledyne LeCroy Protocol Solutions Group web site for software updates and other support related to this product Software updates ar...

Reviews: