Teledyne Kuro, Manual

Page: 27 / 48

Chapter 6 Operating Features 27
6.3 Device Synchronization (Triggering)
Kuro offers several methods of integrating with external hardware devices. Each
camera includes a 10-pin, Hirose HR212-10RC-10SDL(74) connector on the back of the
camera for trigger input/output operations. Refer to
Table 6-1 for pinout information.
A special BNC breakout cable, illustrated in Figure 6-1 , is provided to easily access these
signals, and each breakout BNC cable is labeled according to its function.
Figure 6-1: Typical BNC Cable
Table 6-1: Trigger Cable Pinout
Signal Description
Trigger In Inputs initiate an exposure or sequence
Trigger Ready Out Status indicating if the camera can accept another trigger
Read Out Status indicating the camera is currently digitizing
Expose Out 1 Output for controlling illumination source 1
Expose Out 2 Not currently supported.
Expose Out 3 Not currently supported.
Expose Out 4 Not currently supported.
4
4
11
-01
5
9
_0
012