Teledyne HVD3000, Operating Manual

Page: 33 / 48

Operator’s Manual
27
HVD3000 / HVD3000A Test Record
Serial Number:____________________________________________________
Asset / Tracking Number: _________________________________________
Date:______________________________________________________________
Technician:________________________________________________________
Equipment Model Serial Number Calibration Due Date
Oscilloscope
Digital Multimeter
Function Generator*
* In this Performance Verification Procedure, the function generator is used for making relative measurements. The
output of the generator is measured with a DMM or oscilloscope. Thus, the generator is not required to be calibrated.
Step Description Intermediate Data Test Result
5 Function Generator Output Voltage V
11 Probe Output Voltage V
13 Gain Error (test limit
± 1 %)
%
16 Probe Output Voltage V
18 Gain Error (test limit
± 1 %)
%
Permission is granted to photocopy this page to record the results of the Performance Verification procedure.
File the completed record as required by applicable internal quality procedures.
• Line numbers correspond to steps in the procedure that require the recording of data.
• Record the actual specification limit check under "Test Result". The test limits are included in all of
these steps.
•
Record other measurements and intermediate calculations that support the limit check under
"Intermediate Results".