Teledyne DALSA Piranha 2 P2-2x-01K40, User Manual

Page: 26 / 86

26 Piranha 2 User’s Manual
03-032-00493-14 Teledyne DALSA
3.6 Setting Baud Rate
To set the sp eed of the cam era serial com m u nication p ort, u se the com m and :
Syntax: sbr i
Syntax Elem ents:
i
Bau d rate. Available bau d rates are: 9600 (Defau lt), 19200, 57600,
and 115200.
N otes:

Pow er-on rate is alw ays 9600 bau d .

The
rc
(reset cam era) com m an d w ill not reset the cam era to the
p ow er-on bau d rate.
Exam p le:
sbr 57600
3.7 Setting the Data Mode
To select the cam era ou tp u t m od e, u se the com m and :
Syntax: sdm i
Syntax Elem ents:
i
See Table 8: Mod e Selection Valu es below for allow able p aram eter
valu es.
N otes: To obtain the cu rrent d ata m od e, u se the com m and
gcp
.
Exam p le: sdm 0
In the table below , p orts A-F refer to p orts in the Cam era Link sp ecification.
Table 8: Mode Selection Values
Mode Description
0 8-bit, u sing A/ B/ C/ D p orts for single p rocessor configu ration
1 10-bit, u sing A/ B/ C and D/ E/ F for single processor configu ration
2 8-bit u sing p orts A/ B and D/ E for d u al p rocessor config u ration
3 10-bit, u sing A/ B/ C and D/ E/ F for d u al p rocessor configuration
To obtain the cu rrent d ata m od e, u se the com m and
gcp
.