Teledyne CP Series, User Manual, Page: 67 / 69

User Manual
CP Series
Version 3.1 – June 2020
67
Command description Fields description
Command syntax Description Reply from PowerBox Field name Description units
#TP<XXXX>
Program new exposure time
value
!TP<YYYY>,<E>,<AAAA>
<XXXX> Requested exposure time value s
<YYYY> Programmed exposure time value
<E>
0 : no error
N.A.
1 : no generator connected
2 : generator rental date is over
3 shot is in progress
4: requested value is below min TP value
5: requested value is above max TP value
6: requested TP is bigger than remaining rental
time
7: preheat is required – TP is set automatically
<AAAA>
If <E> = 0,1,2,3,6

0 N.A.
If <E> = 4

min TP value for generator s
If <E> = 5

max TP value for generator s
#ON Start shot !ON N.A. N.A. N.A.
#OF Stop shot !OF N.A. N.A. N.A.
#XO Watchdog !XO N.A. N.A. N.A.
?TS Ask for the shot type !TS<X> <X>
0: None (no shot actually)
N.A.
1: Preheating
2: Normal shot
3: Cycles
4: Conditioning
?SN
Ask for the serial numbers of
generator and PowerBox
!SN<XXXXXXXX>,<YYYYYY
YY>
<XXXXXXXX> Serial number of generator N.A.
<YYYYYYYY> Serial number of PowerBox N.A.
?MD Ask for the generator model !MD<XXXXXXXXX> <XXXXXXXXX> Generator model N.A.