User Manual
CP Series
Version 3.1 – June 2020
49
•
Sh: errors during a shot
•
On: errors during pfc ignition when high kV is being generated.
•
Off: errors during pfc extinction when high kV is being shut down
•
No: Errors related to the PowerBox only
•
Ge: Generator error
•
Gw: Generator warning
5.7.3 V
IEW HISTORY
‘View history’
will show a history of passed error messages sorted by date.
5.7.4 E
XPORT TO
USB
‘Export to USB’
will export the error list to USB when a USB pen drive is plugged in.
5.8 D
EMO MODE
Demo mode is intended for demonstration purpose such as exhibitions
or trade shows. When Demo mode is enabled, the PowerBox will
simulate all operations without actually generating X-rays. The user is
able to change setting of kV, mA, exposure time and go through all the
PowerBox menus. When pressing the START button, the PowerBox will
even simulate an exposure and indicate fake measurements of kV and
mA.
Note:
To be able to enter the
‘Demo mode’
the CP SERIES generator
must be disconnected.
The Safety Key Switch (12) needs to be in the XO position!
5.9 ICM
FUNCTIONS
These after sales service, production and Engineering functions are
reserved for authorized repair service centers and production only. A
service password is required to remove the padlock symbol and gain
access to the menu.
MAIN MENU
Memory access
Settings
All measures
Data access
Errors
Demo mode
ON
ICM functions
Production
After Sales
Engineerings