Page | 9
Installing the Junction Box
The Junction Box contains a USB to RS-485 converter and a power supply. The converter will add a
COM port to the PC for communicating with the pan and tilt. The drivers for the converter need to be
installed onto the PC. These drivers are located on the provided CD labeled “BV3200 CD” in the
“Junction Box” folder under “Drivers.”
There are two drivers to install: one is for a “USB Serial Converter”, and the other is for a “USB Serial
Port.”
1. Connect the USB port on the control box to an available USB port on the PC connected to the internet.
The “Found New Hardware Wizard” will guide you through the automatic installation process.
2. First, the USB Serial Converter driver will install. Select “No, not this time” and click “Next.” Follow
prompts until the device is ready to use or cannot be installed.
NOTE
:
Do not close the second “Found New Hardware Wizard” window while
installing the driver.
NOTE
:
For Windows Vista, disconnect your PC from the internet before installing
drivers; otherwise, Windows Vista will search for and install the drivers automatically
from Windows Updates and cause errors. The instructions below are for Windows XP.
Installation for Windows Vista may vary from the instructions below.
