3. In the
Folder
box, type the path to the folder where you want to save the notifications.
This can be useful if you have multiple cameras connected to the same FTP server.
4. In the
User
and
Password
boxes, type the credentials for FTP access.
5. Click
Apply
.
10.6.3
Scheduler
Use the
Scheduler
page to configure what actions to run, and when to run them. The re-
sult of an action can be sent by e-mail or to a folder on an FTP server.
Available actions are:
•
E-mail image
Send the image with overlay graphics.
•
E-mail result
Send a list of the active measurements and their respective temperatures.
•
Save image on FTP
Send the image with overlay graphics to an FTP server.
To schedule actions, follow this procedure:
1. In the navigation pane, click
Scheduler
.
2. Click the check boxes to select which
Scheduled actions
to use.
3. In the schedule, click the
Active
check box for the days that the action will run:
• To run the action once a day at a certain time, also click
Once
and then set an
Ac-
tion Time
.
• To run the action several times a day, also click
Repeat
and then set a time
Inter-
val
, a
Start action
time, and an
End action
time.
4. Click
Apply
.
To configure delivery to FTP, follow this procedure:
1. In the
FTP Server
box, type the IP address of the FTP server.
2. In the
FTP User
and
FTP Password
boxes, type the credentials for the FTP access.
3. Click
Apply
.
To configure delivery by e-mail, follow this procedure:
1. In the
Recipient e-mail
box, type the e-mail address of the recipient.
2. In the
Mail server
box, type the IP address of the sending mail server.
3. In the
Sender e-mail
box, type the e-mail address of the sender.
4. If the sending mail server requires a login (mail server authentication), select the
Au-
thenticate mail
check box, and then type the credentials in the
User
and
Password
boxes.
5. Click
Apply
.
10.6.4
MQTT
It is possible to setup a publish/subscribe messaging transport using the MQTT protocol
(MQ Telemetry Transport). Topics that are available for subscription are shown in the
Topic subscriptions
section. Note that the corresponding measurement functions and
alarms must be defined and active, or no information will be published.
Follow this procedure:
1. In the navigation pane, click
MQTT
.
2. Click the
Enable MQTT
check box.
3. Type the
Broker host address
and the
TCP Broker Port
used for the subscription
transport.
4. Type the
User
and
Password
to login to the broker.
5. Select preferred
Temperature unit
in the list;
Celsius (C)
,
Fahrenheit (F)
, or
Kelvin (K)
.
6. Select preferred
Output format
in the list;
Json
or
Text
.
7. Click
Apply
.
#T810579; r. AB/78918/78918; en-US
34
