Teledyne 430, User Manual, Page: 14 / 30

Getting Started Teledyne API – Model 430 Compact Ozone Analyzer
12 08311C DCN7342
2.
GETTING STARTED
This section addresses the procedures for unpacking, inspecting, setting up the
instrument, and conducting an initial calibration check.
UNPACKING AND INSPECTING THE INSTRUMENT 2.1.
ATTENTION
COULD DAMAGE INSTRUMENT AND VOID WARRANTY
Printed Circuit Assemblies (PCAs) are sensitive to electro-static
discharges (ESD) too small to be felt by the human nervous system.
Failure to use ESD protection when working with electronic assemblies
will void the instrument warranty. For information on preventing ESD
damage, refer to the manual, Fundamentals of ESD, PN 04786, which
can be downloaded from our website at
http://www.teledyne-api.com
under Help Center > Product Manuals in the Special Manuals section.
CAUTION!
Do not operate this instrument until you’ve removed dust plugs from SAMPLE
and EXHAUST ports on the rear panel.
Note
Teledyne API recommends that you store shipping containers/materials
for future use if/when the instrument should be returned to the factory
for repair and/or calibration service. See Warranty section in this manual
and shipping procedures on our Website at
http://www.teledyne-api.com
under Customer Support > Return Authorization.
Verify that there is no apparent external shipping damage. If damage has occurred,
please advise the shipper first, then Teledyne API.
For your Quality records the Final Test and Validation Data Sheet (P/N 08315) was
included in your shipment as important quality assurance and calibration documentation.